High Flame Retardant Grade Copper Lan Cable Category 6 For CCTV System
Over View
- Application structured cabling, CCTV system , Alarm system , Telecom project etc.
- Compared with cat5 and cat5e,CAT6 CABLE features more stringent specifications for crosstalk and
system noise.
- Can be used for voice, integrated service data network (ISDN), ATM155Mbps,100 Mbps TPDDI , fast
ethernet and gigabit ethernet.
Long transmission distance, small transmission loss, wear resistance, resistance to pressure.
Product Description
| Model | Cat6 Network cable |
| Conductor Size | 23AWG/24AWG |
| 4*2*0.57/0.56/0.54/0.52mm |
| Conductor Material | BC/CCU/CCA/OFC/CCS |
| Nuber Of Conductor | 4P |
| Shiled | UTP/FTP/STP/SFTP /SSTP |
| Flammability Grade: | CMX,CM,MP,CMG,MPG,CMR,MPR |
| Indoor / Outdoor | Single jacket(PVC) / Double jacket(PVC+PE) |
| Insulation Material | PE , HDPE |
| Insulation Thickness | 1.024mm |
| Number of pairs: 4 pairs | Pair1: Orange/White Orange Pair2: Blue/ White Blue Pair3: Green/ White Green Pair4: Brown/White Brown |
| Jacket Material | PVC, ROHS PVC, LSZH PVC |
| Jacket Thickness | 0.98mm |
| DC Resistance(Max.) | 9.5Ω/100m |
| DC Resistance Imbalance | 2.50% |
| Working Capacitance(Max.) | 5.4nF/100m |
| Insulation Resistance | 10000MΩ.km |
| Transmission Velocity | 65% |
| Operating Temperation | -20 °C - +75 °C |
| PVC Jacket Color | As client’s request. |
| Print Words On Cable | CAT6 4P 23AWG VERIFIED TO EIA/TIA 568B.ISO/IEC 11801 EN501 or clients' request. |
Products Structure
Comparison of UTP/FTP/SFTP
| Price | High | SFTP>>FTP>>UTP | Low |
| Flexible | Flexible | UTP>>FTP>>SFTP | Inflexible |
| Didturbance resistant | good | SFTP>>FTP>>UTP | Bad |
Comparision of Cat5e&Cat6
| | Cat5e | Cat6 |
| Maximum length | 100m | 100m |
| Bandwidth | 100Mhz | 250Mhz |
| Disturbance resistant | Normal | Good |
| Suitable for | 100BASE-TX (Fast Ethernet) | 1000BASE-T (Gigabit Ethernet) |
| Diamater | 5.2mm | 5.8mm |
| Theoretical download | 12.8 M/s | 128 M/s |
About Cat5e system
1000Base-T is the standard applied by the Cat5e system during the Gigabit Ethernet transaction, which could run
properly on the Cat5 Twist-Pair that meets the standard of ANSI/TIA/EIA-568A (1995).1000Base-T would finish the data transaction by applying to 4 pairs of Cat5 Twist-Pair and each of them is responsible for a 250Mbps data flow. However, as the designed bandwidth is only 100MHz
for the Cat5 & Cat5e Twist-Pair, it must satisfy some special requirements to achieve the two-way transmission within the 1000Mbps network.
About Cat6 system
1000BASE-Tx is the working style for Cat6 system. Similarly, 1000Base-Tx works on the basis of 4 pairs of
Twist-Pair; but two of them are for sending while the other two are for receiving(similar to the 100Base-TX, who sends and receives data respectively by two Twist-Pair). Each pair of cables doesn’t conduct a two-way transmission themselves; therefore the crosstalk between cables decreases greatly, along with a relatively
simple coding way. Such kind of technology has a lower requirement on the network interface. It doesn’t require quite a complicated circuit design thus the cost on network interface is decreased. Whereas, along with
the efficiency decrease of the used cables (two for sending and two for receiving), the bandwidth is required to
be over 100mhz so as to achieve a 1000mbps transmission speed;i.e. such kind of network is not supported in
the Cat5&Cat5e system but will only be supported by the Cat6 system.
Product Tags:
|
|
High Flame Retardant Grade Copper Lan Cable Category 6 For CCTV System Images
|
